Star Engineering

We are engaged in offering a wide range of GSu 905D Power Controllers to our clients. Our range of all products is widely appreciated by our clients.

Our organization is ranked amongst the reputed names in the market for providing KG 934 Generator Controller Unit. Furthermore, we present this range to our patrons at nominal prices.

As a customer-focused organization, we are providing a wide array PSO500 Generator Controller Unit. In addition to this, we are providing these products at very leading prices.

• 16 Bit RISC, state of art,  microcontroller based System.
• True RMS measurement of all measured parameters with 1% accuracy of measured value (Not full scale)
• Backlit LCD Display for easy reading and parameter settings. No need to consult the manual while programming the unit.
• All the inputs, such as Generator and Battery voltages are fully isolated, providing the freedom to design a totally isolated system. This avoids and prevents malfunctioning/ burning of the unit.
• Fully operational up to 4V. Can withstand a voltage dip up to 0V for 1sec. 
• All system parameters are user programmable
• Measurement and display of LLOP, Fuel Level and HWT
• Records last 20 faults
• Suitable for all types of engines
• All digital inputs are optically isolated for enhanced reliability
• All outputs are through potential free contacts for system stability and reliability
• All contacts are protected by TVS to strengthen the EMI/EMC capabilities of the unit.
• Housed in 92X92mm Din Standard housing. 
• Voltage monitoring and protection for under/over voltage and over speeding.
• Oil Pressure
• HWT RWL
• Over Load Emergency
• Low Fuel
• Charging Alternator Fail/V-Belt
• Choice of selective sensor measurement display 
• DES-9 equipped with LCD display and displays
•  Generator voltage
• Generator Frequency
• Generator Current
• Battery Voltage
• Generator Run Hour
• RPM
• Oil Pressure in KG/cm2
• Radiator Temp in degree centigrade
• Fuel Level in %
• Programmed settings
• KW
• PF
• KWhr
• Service Hour 
• DES-9is equipped with the following annunciations for system status and faults:
• LLOP
• HWT(Model A)
• Fuel
• RWL
• DG Under Voltage 
• DG Over Voltage
• DG Over/Under Frequency
• Charging Alternator/ V-Belt
• DG Overload
• Emergency 
• DES-9 is an engine monitoring and supervisor unit. The engine can be Started/Stopped from the front panel of DES-9 or externally by means of key Switch etc. The Start / stop from the front or remote is one touch operation, meaning that once the switch is pressed the Crank/ fuel solenoid shall be operational till the “Crank Time / Stop Sol Time” , as programmed, has expired . DES-9 automatically detects that the engine on conditions by monitoring the generator voltage and starts monitoring the engine for under/over voltage, LLOP, HWT and emergency faults etc. On detection of any of these faults for the pre-programmed duration the engine is automatically shut down and fault along with run hour is recorded in non-volatile memory. The run hour time of engine is recorded in internal non-volatile memory.
• To view the last 20 fault history enters in this mode as explained above. Maximum of last 20faults along with Run Hour stamp shall be displayed on the LCD. The first row shall display the fault and the next row shall display the run hour at which the fault has occurred. The next  fault can be viewed by pressing “NEXT”. The mode shall exit to normal mode after the last fault recording is displayed. Absence of any fault recoding shall not display any fault data. 
• Service due, warning is issued by DES-9, by flashing the Ser LED. This LED shall keep flashing till it is not reset by entering this mode. Pls refer Para 9 for procedure to reset service hour 
• For changing the solenoid mode first press (R) (reset) button, than press + button while the reset button is pressed.
• In this mode fuel solenoid contact changes from Open to Close at the time of cranking and remains close till the genset is running. For stopping the generator this contact opens

• Microprocessor based design
• 8 digital inputs, 9 relay outputs
• Automatic, Manual, Test, Periodic test operating modes
• Display Parameters AC Voltage, AC Current
• Frequency, Hours, Battery Voltage, Charge Voltage
• Configurable solid state outputs
• Configurable timer setting
• Solid state fuel and crank outputs
• External remote start inputs
• LED alarm indications
• Start/Stop delay timer
• Warm up / Cooling down timer
• Energized to stop timer
• Single / Three Phase Mains Sensing
• Load contactor control solid state output
• Preheat, glow plug timer
• Over & Under speed shutdown
• Automatic crank disconnection
• Serial communication option
• Inhibit mode operation
• Electronic charge Lamp
• Charge voltage display
• Periodic Auto Start and Stop
• Mains Supply On
• Mains Contactor On
• Generator Supply On
• Generator Contactor On
• Battery Low Voltage / Charge Fail
• Low Oil Pressure
• High Engine Temperature
• Generator Over Speed Fault
• Low Fuel Level
• Generator Over Load Fault
• Generator Fail to Start
• Alarm- 1
• Alarm- 2

Cummins HMI 320 ek advanced Human Machine Interface (HMI) display controller hai jo generator sets (DG sets) ke monitoring aur control ke liye use hota hai. Yeh PowerCommand system ke saath seamlessly integrate hota hai aur real-time data display, fault diagnostics aur remote operation provide karta hai.

Iska user-friendly interface operator ko generator ki performance, alarms aur parameters easily monitor karne deta hai.

We are offering high-quality HMI211 Controller used in Cummins diesel generator sets. This unit is designed for efficient monitoring and control of DG operations.

It provides real-time data such as voltage, current, frequency, engine parameters, and fault indications. The controller ensures smooth generator operation with user-friendly interface and reliable performance.

Suitable for industrial, commercial, and backup power applications.

We are engaged in offering a wide range of GC 1200 Generator Unit to our clients. Our range of all products is widely appreciated by our clients.

• Large back-lit icon LCD display.
• Heated display option.
• 3-phase generator sensing.
• 3-phase generator and mains (utility) sensing.
• 600 V ph-ph nominal system compatibility.
• Generator & load power monitoring (kW, kV A, kV Ar, pf).
• Generator overload protection (kW).
• Configurable inputs & outputs.
• Fuel and start outputs (configurable on CAN).
• Configurable DC, volt-free and staged loading outputs.
• CAN & alternator speed sensing.
• Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.
• Battery voltage monitoring.
• Configurable event log (50).
• DSE Configuration Suite PC Software.
• Ultimate size to feature ratio
• Automatically transfers between mains (utility) and generator (DSE4520 only)
• Hours counter provides accurate information for monitoring and maintenance periods
• User-friendly set-up and button layout for ease of use
• Multiple parameters are monitored simultaneously which are clearly displayed on the largest back-lit icon display in its class
• The module can be configured to suit a wide range of applications
• Uses DSE Configuration Suite PC Software for simplified configuration
• Compatible with a wide range of CAN engines
• Licence-free PC software
• IP65 rating (with optional gasket) offers increased resistance to water ingress
• Power save mode.
• Engine maintenance alarms (3).
• Alternative configuration.
• Displays information to the operator in a clear and concise format.
• Ensures the display continues to operate in extreme cold weather conditions.
• Provides true generator sensing.
• Provides true generator and mains (utility) sensing.
• Provides global flexibility.
• Provides clear accurate power measurement information.
• Provides engine overload protection.
• Provides multiple installation options.
• Provides full monitoring flexibility.
• Ensures the engine is fully monitored for improved operating performance.
• Ensures the battery maintains enough power at all times.
• Provides access to historical alarms and operational status.
• Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
• lternator frequency & CAN speed sensing in one variant
• Largest back-lit icon display in its class
• Heated display option
• Real time clock provides accurate event logging
• Fully configurable via the fascia or PC using USB communication
• Extremely efficient power save mode
• 3 phase generator sensing
• 3 phase mains (utility) sensing (DSE4520 only)
• Compatible with 600 V ph to ph nominal systems
• Generator/load power monitoring (kW, kV A, kV Ar, pf)
• Accumulated power monitoring (kW h, kVA h, kVAr h)
• Generator overload protection (kW)
• Generator/load current monitoring and protection  Fuel and start outputs (configurable when using CAN)
• 4 configurable DC outputs (2 for DSE4510)
• 3 configurable analogue/digital inputs
• 4 configurable digital inputs
• Configurable staged loading outputs
• 3 engine maintainance alarms
• Engine speed protection
• Engine hours counter
• Engine pre-heat
• Engine run-time scheduler
• Engine idle control for starting & stopping
• Battery voltage monitoring
• Start on low battery voltage

• Rated output: 360 kW/HP (prime power rating as per ISO 3046)
• Engine configuration: V type
• Operating cycle: 4 Stroke DI
• Displacement: 15.91 Litre
• Bore x Stroke: 130x150mm
• Aspiration: TA
• Compression Ratio: 16.5:1
• Country of Origin: Made in India 

• Automatic/manual start with configurable start/stop timers.
• Configurable inputs/outputs (10/8).
• Mains (Utility) failure detection.
• AC/DC voltage measurement.
• Battery temperature monitor/charge remaining display/depth of discharge display.
• Backed-up real time clock.
• Configurable event log (250).
• Battery condition automatic start/stop.
• USB, RS232, RS485, Ethernet and Modbus RTU/TCP communications.
• Offers flexibility to control the module manually, remotely or on pre-set timers and start/stop according to battery condition.
• Provides multiple installation options.
• Provides access to historical alarms and operational status.
• Gives full mains (utility) back up.
• Provides flexibility for use on AC or DC systems.
• Provides information on battery temperature, charge remaining and depth of discharge.
• Ensures data is not lost when module is disconnected from its power source.
• Avoids the battery draining completely by starting the generator when the battery needs charging.
• Provides secure and simple off site monitoring. All ports are continuously active.
• Configurable maintenance alarms (3).
• Configurable battery maintenance alarms (3).
• 2 DC shunt inputs (configurable 0-250mV and 0-5000A). kW overload alarms.
• Electrical protections.
• PLC functionality.
• Exercise timer.
• Fuel usage monitor and low level alarms.
• Manual/automatic load transfer.
• SCADA monitoring.
• Overcurrent & short circuit DC overload alarms.
• Able to Survive 0 V for 50 Ms, Providing Supply Was at Least 10 V Before Dropout and Supply Recovers to 5 V. This Is Achieved Without the Need for Internal Batteries
• Configurable inputs (10)
• Configurable outputs (8)
• Configurable maintenance alarms (3)
• Configurable battery maintenance alarms (3)